| Open Round End Cap with Tri-Bolt Holes |
| | Inches | Millimeters |
| Outer diameter | 12.75 | 323.85 |
| Inner diameter | 8.5 | 215.9 |
| Inner height | 0.54 | 13.716 |
| Outer height | 0.5 | 12.7 |
| Inner rim diameter | 6.75 | 171.45 |
| Open Round End Cap with Outer Lip |
| | Inches | Millimeters |
| Outer diameter | 12.75 | 323.85 |
| Inner diameter | 8.5 | 215.9 |
| Inner diameter | 0.625 | 15.875 |
| Outer height | 0.368 | 9.3472 |
| Lip | 0.375 | 9.525 |
| Open Round End Cap | |
| | Inches | Millimeters | |
| Outer diameter | 12.75 | 323.85 | |
| Inner diameter | 8.5 | 215.9 | |
| Inner height | 0.5 | 12.7 | |
| Outer Height | 0.5 | 12.7 | |
| Closed Round End Cap | |
| | Inches | Millimeters | |
| Outer diameter | 12.75 | 323.85 | |
| Inner diameter | 8.375 | 212.725 | |
| Inner height | 0.5 | 12.7 | |
| outer height | 0.5 | 12.7 | |
| Closed Round End Cap with Bolt Hole | |
| | Inches | Millimeters | |
| Outer diameter | 12.75 | 323.85 | |
| Inner diameter | 8.375 | 212.725 | |
| Inner height | 0.5 | 12.7 | |
| Outer height | 0.5 | 12.7 | |
| Bolt Hole | 0.625 | 15.875 | |
| Open Round End Cap with Flange | |
| | Inches | Millimeters | |
| Outer diameter | 5.75 | 146.05 | |
| Inner diameter | 2.5 | 63.5 | |
| Inner height | 0.5 | 12.7 | |
| Outer height | 0.278 | 7.0612 | |
| Closed Round End Cap | |
| | Inches | Millimeters | |
| Outer diameter | 5.25 | 133.35 | |
| Inner diameter | 2.5 | 63.5 | |
| Inner height | 0.875 | 22.225 | |
| Outer height | 0.172 | 4.3688 | |
3. Applications
1. The purpose of the air filter cover is to prevent dust from entering the engine directly. The role of the air filter: the engine must inhale a lot of air during operation. If the air is not filtered, the suspended dust in the air will be sucked into the cylinder. , will accelerate the wear of the piston group and cylinder. Larger particles entering between the piston and cylinder can cause severe "cylinder pull", especially in dry and sandy working environments; the air filter is installed in front of the carburetor or intake pipe. In order to filter out dust and sand particles in the air, it is possible to ensure that sufficient, clean air enters the cylinder.
2.The filter end caps are stamped into various shapes as per needed from the steel sheet. Filter end cap is mainly used to seal both ends of the filter material and support the filter material.
3.The filter element is mounted on a vehicle,engine or mechanical device.During the operation of the machine,vibration is generated,the air filter is subjected to a large stress,and the end cover can effectively improve the bearing capacity of the filter material.
4. Our sevice
1.Convenient Payment Methoods
2.Personalized Service
3.Any inquiries will be replied within 12 hours.
4.OEM/ODM Available
5.Samples is available for your evaluation&formulation development.
6.Fastest delivery: Sample order in stock and 8-10 days for mass production.
5.Company introduction
Hebei Anping Changfeng filter material Co., Ltd. is located in Anping, the hometown of wire mesh in China. It is a comprehensive factory integrating production, sales, import and export. Products are exported to Europe, Asia, Africa and other countries and regions, selling well. As a professional factory with more than 20 years of experience, we have a strict QC team and production team to ensure good control from the beginning of raw material supply, and pay attention to production details to provide high quality at the most reasonable price.
